PCVR Central
обложка Visions of Mana

legaiaflame's UEVR profile

для Visions of Mana · от legaiaflame · выпущен 1 Sept 2025

UEVR профильПКVRРодной

Многоразовый фреймворк или инжектор, который добавляет поддержку VR в одну или несколько игр. Профиль сообщества UEVR, универсального инжектора для игр Unreal Engine. Вы устанавливаете UEVR один раз, а затем загружаете этот профиль, чтобы играть в эту игру в VR.

Заметки от legaiaflame

4 Different Camera Angles: - Default-View, First-Person View, 3rd-Person View, Pikul/Vuscav/Flammie-Riding View. To begin make sure within the UEVR menu/Runtime to hit Recenter View, so your view becomes full center. - The Views are bound to keyboard keys combined with Spacebar. Default-View is set to 'A'. First-Person is set to 'A' combined with 'Spacebar'. 3rd-Person is set to 'S' combined with 'Spacebar' and Pikul-Riding View is set to 'D' combined with 'Spacebar'. - Once you hit 'Spacebar' to go to First-Person, you just keep it on and toggle on or off the other views with the A,S, and D keys. Viewing Story Cutscenes: (Default-View) - Whenever there is a Story Cutscene you can just press Spacebar to toggle off the First-Person View or hit 'A'. Then when the cutscene is over just press 'Spacebar' again to go back into First-Person. - Default view is also good for a completely zoomed out battle view (in case you want to view the CS moves). First-Person View: - Set the view up with 'A' then hit 'Spacebar' to activate it. First-person was attached to Main/Common Objects/PlayerController/'Attach Camera to', and the camera was fixed and adjusted manually. You can toggle it on and off switching back and forth to the Default-View. If First-Person Stops Working (Workaround): The first half of the game, after certain cutscenes or transitioning between the towns and the field, the First-Person View will unhook. This sucks but you actually have to keep going back into the UEVR menu, going down to 'main' and re-attach to /Common Objects/PlayerController/ and hit 'Attach Camera to'. If you can't see the Uobject Hook/'main' option, make sure 'Show advance options' is checked in the upper left-hand corner of the UEVR menu. And lastly if first-person isn't working upon startup just go to config within the UEVR menu and it will re-initiate and you can also select 'Enable at Startup' and the first-person will automatically be turned on when you start the game. But, It seems like once you get to Ledgas Bay/Pritta Ridge, where you get Palamena (Just about halfway through the game.) the First-Person hook is more stable and won't unhook any longer. 3rd-Person View: - Set the view up with 'S' then hit 'Spacebar' to activate it. This is good if you want a slightly drawn back, over-the-shoulder view of your character. And is good if you actually want to see your character in battle. Default view is also good for a completely zoomed out battle view (in case you want to view the CS moves). Pikul/Vuscav/Flammie-Riding View: - Set the view up with 'D' then hit 'Spacebar' to activate it. This view is great for when you get your Pikul mount and start riding across the field! It feels like you're actually sitting on top and looking out past his ears! Hold X to stop riding and LB+X to call him with the bell. Once you get Vuscav the turtle and start riding across the Ocean, this view works great as well as it feels like you are right on top of his shell holding on for dear life as he paddles like a speedboat! And lastly, the view is even better for riding Flammie through the sky! Feels like The NeverEnding Story as you ride on top of his back grabbing his fur!

Получите это из официальный сайт

Бесплатно

Открыть страницу mod

Загрузки происходят на собственной странице создателя. PCVR Central никогда не размещает файлы повторно.

Установка профиля UEVR

Все профили сообщества UEVR устанавливаются одинаково. Если вы использовали один из них, вы использовали их все.

  1. Установите сам UEVR из uevr.io. Это бесплатно, и это это отдельная программа от профиля: профиль это просто настройки.
  2. Загрузите профиль со страницы создателя, указанной выше. Это .zip.
  3. Запустите игру, затем откройте интерфейс UEVR и выберите игру. процесс из списка.
  4. Импортируйте профиль с помощью функции импорта интерфейса. UEVR держит настройки каждой игры в %APPDATA%\UnrealVRMod\<game executable name>.
  5. Внедрение. Как только вы окажетесь в VR, нажмите Insert (или L3+R3 на контроллере) чтобы открыть внутриигровое меню и настроить все, что выглядит неправильно.

Если профиль ведет себя некорректно, удалите папку с этой игрой в разделе %APPDATA%\UnrealVRMod\ и снова импортируйте его с нуля.

Видео пошаговое выполнение тех же действий:

Полная информация

VR реализация
VR Фреймворк/Инжектор
Платформы
ПКVR
Цена
Бесплатно
Управление движением
Неизвестный
6DOF цель
Неизвестный
Комнатный масштаб
Неизвестный
Левша
Неизвестный
Перспектива
Неизвестный
VR время выполнения
OpenXR и OpenVR
Гарнитуры протестированы
Пока ничего не сообщалось
Витрины протестированы
Пока ничего не сообщалось
Сложность установки
Легкий установить
Требования
UEVR (praydog's Unreal Engine VR injector), SteamVR or another OpenXR runtime
Версия игры проверена
Неизвестный
Последняя проверка
Никогда

Отзывы игроков

Мнение игрока, отдельно от знака качества, приведенного выше. Этот ярлык — наше понимание того, что делает метод; это опыт других людей по его фактическому использованию.

Обнаружили проблему или играли сами?

Свежесть зависит от отчетов людей, которые на самом деле его запускали.